rolling mill production line-Malaysia project

Horizontal housingless stand

Horizontal housingless stand consists of a working stand  and a moving beam with a spindle carrier, a combined gearbox connected with the working stand via gear-type spindles mounted on a single base . The gear-type spindles are mounted inside hollow output shafts of the combined gearbox that leads to the spindle length extension and oblique angle arisen from rolls gap changing reduction. A gear coupling is mounted on a high speed input shaft of the combined gearbox for connection with a main drive motor.

Vertical housingless stand

Consists of a working stand and a combined gearbox connected with the working stand via gear-type spindles mounted on a single base. The gear-type spindles are mounted inside hollow output shafts of the combined gearbox that leads to the spindle length extension and oblique angle arisen from rolls gap changing reduction. A gear coupling is mounted on a high speed input shaft of the combined gearbox for connection with a main drive motor.